Pump Plunger Assemblies
Parker Hannifan WATER LEVEL SENSOR (604970834)
Water level sensor for Parker (Domnick Hunter) Model 60H Hydrogen generator
Thermo Scientific High-flow Needle Insert Assembly
32 Gauge Metal Needle Regular Flow Kit. Needle insert for high-flow applications.
Scientific Instrument Services Inc Odor Filter Element for Edwards EMF10 Oil Mist Eliminator 5/pk
EMF10 Oil mist filter odor element (pk 5) for : E-LAB 2 Rotary Pump 3.7 m3h-1, 2.2 ft3min-1, 61.7 l min-1 Outlet Mist Filters
Across International KF25/NW25 Flange to 3/8" Hose Barb Adapter for Vacuum Connection
One piece stainless steel KF25/NW25 to 3/8" hose barb adapter for secure vacuum connection. Compatible with the Ai 2.5, 7.2 cfm and Welch 2.3 cfm vacuum pumps, offered by Across International.
Scientific Instrument Services Inc Odor Filter Element for Edwards EMF20 Oil Mist Eliminator 5/pk
Edwards EMF20 Oil Mist Filters are used to separate and trap oil mist and odors discharged with the exhaust from oil sealed rotary vacuum pumps. The Oil Mist Filters have two-part injection molded plastic bodies which contain a fiber composite oil mist filter and an activated carbon odor filter. Exhaust gases from the pump travel upwards to the center of the Oil Mist Filter and through the filter element to the outside. Oil droplets that are trapped by the fiber composite element travel down the filter and collect in a reservoir in the base of the Oil Mist Filter. The EMF20 Oil Mist Exhaust Filter is designed to be used with the following Edwards Rotary Vane Pumps: Edwards RV12, Edwards E1M18, Edwards E2M18. 5/pk
Leybold Vacuum Products Inc Exhaust Filter Cartridge
LEYBOLD exhaust filter cartridge SOGEVAC SV 65-120 B.
Trajan Scientific CTC Analytics PAL System Kit Wash, 10 x 10mL Vials, Caps & Seals
CTC Analytics PAL System Kit, 10 each: 10mL Vials, Caps & Seals, 20mm PE Snap Caps With PTFE/Silicone septa; Vial Part Number: LPP.10751, Cap Part Number: PAL.KITSEALCAP. CTC PN: Kit Wash 10-CV
Electron Microscopy Sciences Edwards EMF10 Oil Mister Filter
Oil mist filters help with exhaust mist from the vacuum pump which sticks to any surface that it touches and becomes a dust magnet. Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen with gas ballast or when pumping at high gas throughputs. You can also return oil trapped in the mist filter back to the pump, although you must ensure that the process gases will not contaminate the pumpor pump oil.
Protection from oil mist emissions as required by COSHH and health and safety regulations. Use of optional oil return kits results in reduced oil level maintenance and savings in pump oil and if the oil element becomes blocked. An integral pressure relief valve opens. For use with the RV3, RV5, and RV8.